During the course of its development, the "Hit Air" system was subjected to demanding tests using the equipment for testing helmets.
The following G value shocks illustrate the likely injury sustained. More than 300 G's: Concussion or similar injury More than 350 G's: Concussion and possible loss of consciousness More than 400 G's: Possible life threatening injuries.	Date of the Test: August 30, 2000 Temperature: 26C (79F) Tester: (JIS) T-8133. Tested jacket made by SPIDI of Italy Tested padding made by Knox of England

Shock absorbing factor (G Value) of a falling model human head model weighing 5 kg (11 lbs.) The centre of the back of the jacket (i.e. the position of the spinal cord) is spread over a flat anvil (steel sheet). A JIS standard 5kg (11 lbs.) human head model is released from above to measure the shock absorption factor. Note: When the "Hit Air" is fully inflated, internal pressure is 25kpa - 35kpa. (3.5 - 5 psi.) A Jacket + Inflated "Hit Air" + Spinal cord padding B Jacket + Inflated "Hit Air" C Jacket + Spinal cord padding D Jacket only Shock absorbing material Falling Height (M) A B C D 0 0 0 0 0 0.1       110(G) 0.2       284(G) 0.25 10(G)   63(G) 381(G) 0.5 17(G) 17(G) 106(G)   1.0 28(G) 49(G) 481(G)   1.25         1.5 87(G)       2.0 156(G)       2.5 273(G)

Shock absorbing factor (G Value) of a falling human head model weighing 5 kg (11 lbs.) The standard test model wearing a helmet, to which the inflated neck portion of "Hit Air" is attached, is dropped to test the shock-absorbing effect. The test was conducted to simulate the model falling on the back of the head. As the data show, the results proved the effectiveness of the "Hit Air" system. Note: When the "Hit Air" is fully inflated, internal pressure is 25kpa - 35kpa. (3.5 - 5 psi.) A Helmet + Inflated Neck cushion B Helmet only Shock absorbing material Falling Height (M) A B 0 0 0 0.5 57(G) 81(G) 1.0 137(G) 146(G)

HOME   |    NOTICE   |    FAQ   |    CONTACT   |

COPYRIGHT @ 2008 HITAITUSA.COM / HIT-AIR.BIZ ALL RIGHTS RESERVED.